EVERCOAT OPTEX LIGHT SPEED KIT BARGAIN UV
In this amazing value for money kit you will receive the following:
2 x tins of LIGHT SPEED OPTEX worth £139.00
2 x bottles of LIGHT SPEED 440 EXPRESS worth £38.52
1 x SCANGRIP UV Gun worth over £1100.00
LIGHT SPEED OPTEX
OPTEX® Light Speed™ Premium Filler is a dual cured bodyfiller. Its excellent sanding qualities are a result of the patented Ecoresin™.
OPTEX® Light Speed™ Premium Filler uses a new patent pending colour change technology that optically transitions from pink to a light grey-green, and can be accelerated to cure in 3 minutes (i).
It’s non-sag formula has excellent filling properties, while eliminating the need for finishing putty.
Dual Cure: cures with UV LED Lamp and/or traditional catalisation
Ready to sand in just 3 minutes when cured with UV LED Lamp (i)
Uses patent pending colour-changing technology
Spreads easy and virtually eliminates micro–pinholes
Excellent sanding thanks to ECORESIN™ technology
Meets 500 hour corrosion resistance (ASTM B117)
Apply in layers with even firm pressure. Do not apply all at once.
UV LIGHT CURING
Apply UV light (i) at a distance 20 – 25 cm (8 – 10 inches) for 3 minutes, at a maximum tickness of 6 mm
Diameter area of application – 25 cm
Apply UV light (i) at a distance 12 – 13 cm (5 inches) for 2 minutes, at a maximum tickness of 5 mm (200
Diameter area of application – 13 cm
4400 Express Light Speed
440 Express LIGHT SPEED™ a 1K UV LED Cured for micro-pinholes that are hard to identify prior to primer application.
This patent pending technology is a high-solids polyester that is easy to apply and cured in 30 seconds (i) leaving a ready to prime surface. Testing has shown, when used correctly, will eliminate up to 90% of all rework caused by micro-pinholes.
Ready to prime in just 30 seconds when cured with
UV LED Lamp (i)
No sanding required
If excess material builds up on the repair area, lightly sand with P320 grit or finer after cured to remove any excess product prior to applying primer.
NOTE: Use UV-A LED Lamp rated at wavelength of 395nm and min. irradiance of 30 mW/cm2 for
(i) All tests were conducted using a SCANGRIP® UV-GUN
IMPORTANT SAFETY INFORMATION. The use of equipment not recommended by the manufacturer or contrary to the instructions may cause an unsafe condition.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS with UV/LED curing equipment manufacture
– When using waterborne primers, finish by preparing with a grey Nylon Web, then follow your waterborne coating manufacturer’s recommendation
– 440 Express LIGHT SPEED™ is not designed to replace polyester glazing putties, or recommended for use over conventional bodyfiller.
SCAN GRIP GUN
RECHARGEABLE AND HIGH EFFICIENT LED WORK LIGHT FOR UV CURING OF LARGER AREAS
UV-GUN is an extremely powerful LED UV curing lamp for highly efficient and very fast curing of large paint repair areas. It provides a long operation time and is rechargeable with exchangeable battery.
SCANGRIP has taken advantage of new, high performance battery technologies and invented an innovative concept of flexible and reliable power supply. Easily you can insert a new, fully charged battery and continue the work while another battery is charging.
Featuring high-quality components and active cooling, UV-GUN has a long lifetime and keeps a high performance level throughout the daily operations. No heat is produced on the panel or the paint during the curing, allowing use on of plastic parts or any heat sensitive material.
UV-GUN has been upgraded with an LCD display enabling you to see the remaining battery level and ongoing curing time. With this feature, you will know the exact curing time of each operation and see when it is time to exchange the battery.
Equipped with an ergonomic design for ultimate comfortability and a firm grip, UV-GUN is the ideal handheld UV light for curing. UV-GUN is supplied with a solvent resistant glass lens.
Register within 30 days of purchase for extended 3 year warranty from Scangrip.
Protective UV Curing Eyewear
Wear suitable protective eye wear when operating a UV lamp
Compatibility UV Cured Products
SCANGRIP specialized LED work lights for UV CURING has been tested and proven successfully on leading brands of UV-cured products.
Why Choose The UV-GUN?
Fast curing process
No heat is produced on the panel or the paint during the curing, allowing use on plastic parts and other heat sensitive materials
See remaining battery level and ongoing curing time with the upgraded LCD display
Solvent resistant glass lens
Featuring high-quality components and active cooling UV-GUN has a long lifetime and keeps a high performance level throughout the day
// The design of UV-GUN is unique and covered by EU design patent.
// Curing diameter at 56 cm: ø68 cm
// Minimum Irradiance at 56 cm: 6 mW/cm2
// Center Irradiance at 56 cm: 14 mW/cm2
// Curing diameter at 10 cm: ø18 cm
// Minimum Irradiance at 10 cm: 68 mW/cm2
// Center Irradiance at 10 cm: 340 mW/cm2